Please note that all Camden Electronics' products are RoHS compliant.
A range of Module boxes from size 1 (17.5mm) to size 12 (210mm)
CNMB
Snap-fit kit for easy assembly
Boxes fit 35mm DIN rail or direct surface mount
Self customised perforated terminal covers as standard
Snap fit terminal covers for IP20 finger protection
Can carry up to 3 PCBs horizontally and 2/4 vertically
Grey, transparent red or clear snap-in covers
Front panel ideal for screen printing logos etc.
Moulded in grey UL94-V0 flame retardant PC
Enclosed base eliminates any need for additional insulation
Optional adaptor for G rail mounting
Lifting the Lid On Enclosure Choice
10 Questions and Answers on Enclosure Specifying
Making Enclosure Solutions Easy
A Buyers Guide
Handy Buyers Tips
A range of 12 Volt heavy duty VRLA batteries suitable for applications such as mobility scooters, wheelchairs, robots, golf trolleys, floor cleaning machines etc.
BEV
Available from 12Ah to 70Ah
Absorbent Glass Matt (AGM) construction
Low self discharge to ensure long storage life
Acid paste contained in AGM giving non-spillable, maintenance free construction
A range of three 3-way terminal strips with cable clamp
CSRTB
Screw or snap in mounting
Moulded from PA6 UL94-V2
Self-extinguishing
VDE approved
All tests from EN60998-1, -2-1, and –2.2
Compliant with EN60598 4.7 and 11.2
A range of 5mm pitch screw flange plug-in terminals
CTBA92FL
Screw flanges for secure mating
VDE and UL approvals
Professional rising clamp terminals
Polarised mouldings
Up to 4mm sq cable entry
From 2 to 22 poles available
A range of 5.08mm pitch screw flange plug-in terminals
CTBA92FL
Screw flanges for secure mating
VDE and UL approvals
Professional rising clamp terminals
Polarised mouldings
Up to 4mm sq cable entry
From 2 to 22 poles available
Four Channel Opto-Isolator
CIM/OPTO4
Four independent channels
Inputs 24-400VDC (polarity insensitive) or 24-265VAC.
Outputs 300VDC/150mA, max
NPN floating Darlington transistors
Output power 150mW max.
Input to output isolation 2.5kV
Plugable terminal blocks on inputs and outputs
DIN rail (35mm) or surface mounting
MSDS, Recycling and the EU Battery Directive
PCB Mounted Terminal Strip
CTBSN100
12 pole strip
Flame retardant material
Can be supplied to specified number of poles
2.5mm sq cable entry
Anti solder wicking terminals
Captive screws
Guided pin alignment
Standard colour natural V0 option beige
CE and VDE approved
Used to balance the voltage of pairs of batteries during charging to improve performance and extend battery life
CEQ12
Balanced charging results in increased starting current, longer duration, and extended battery life
Can be used with all types of 12 volt battery, e.g. AGM, GEL, Flooded, Deep Cycle, Marine etc.
Rechargeable Lantern Battery
BEL060040S
Protection device fitted
Absorbent Glass Matt (AGM) construction
Can be used in any orientation
Supplied with terminal covers
Can be stored in charged condition
Can be supplied singly or bulk pack of 20
Charger also available
New Range Of Camden Powerfuses
aR, aM & gG
aR Type Semiconductor Fuse
gG Type Powerfuse
aM Type Powerfuse
Camden Solar Batteries
BES Series
Good tolerance to unpredictable charging
Good recovery from deep discharge
No equalization charge necessary
Wide range of operating temperatures
Gel electrolyte
Low self discharge
PCB Barrier Strip 6.35mm Pitch Tri Barrier
CBS40
2 to 30 poles available
Rating: 10A / 300 Vac
Material: PA (UL94-V0) Black
Screw: M3.0 steel Ni plated
PCB hole Size: 1.6mm - 1.8mm dia
PCB Barrier Strip 8.25mm Pitch Tri Barrier
CBS42
2 to 30 poles available
Rating: 15A / 300 Vac
Material: PA (UL94-V0) Black
Screw: M3.0 steel Ni plated
PCB Hole Size: 1.6mm - 1.8mm dia
PCB Barrier Strip 9.5mm Pitch Tri Barrier
CBS44
2 to 30 poles available
Rating: 15A / 300 Vac
Material: PTB (UL94-V0) Black
Screw: M3.0 steel Ni plated
PCB hole Size: 2mm - 2.2mm dia
PCB Barrier Strip 9.5mm Pitch Dual Barrier
CBS34
2 to 30 poles available
Rating: 20A / 300 Vac
Material: PTB (UL94-V0) Black
Screw: M3.5 steel Ni plated
PCB hole Size: 2mm - 2.2mm dia
Chassis Mount Barrier Strip 9.5mm Pitch Dual Barrier
CBS64
2 to 30 poles available
Rating: 20A / 300 Vac
Material: Polyamide (UL94-V0) Black
Screw: 6-32, steel Ni plated
Integral Mounting Holes
Chassis Mount Bariier Strip 11mm Pitch Dual Barrier
CBS66
2 to 30 poles available
Rating: 25A / 300 Vac
Material: Polyamide (UL94-V0) Black
Screw: 6-32, steel Ni plated
Integral Mounting Holes
Camden Electronics Ltd
60 James Carter Road
Mildenhall
Suffolk IP28 7DE. UK
Tel: +44 (0) 1638 716101
Fax:+44 (0) 1638 716554
Email: camdeninfo@camdenelec.com
